Dynamic Host Configuration Protocol (DHCP) is a protocol used by networked devices obtain the parameters necessary for operation in an Internet Protocol network. This protocol reduces system administration workload, allowing devices to be added to the network with little or no manual configuration.
The Dynamic Host Configuration Protocol (DHCP) automates the assignment of IP addresses, subnet masks, default gateway, and other IP parameters.
When a DHCP-configured client connects to a network, the DHCP client sends a broadcast query requesting necessary information from a DHCP server. The DHCP server manages a pool of IP addresses and information about client configuration parameters such as the default gateway, the domain name, the DNS servers, other servers such as time servers, and so forth. Upon receipt of a valid request the server will assign the computer an IP address, a lease (the length of time for which the allocation is valid), and other IP configuration parameters, such as the subnet mask and the default gateway. The query is typically initiated immediately after booting and must be completed before the client can initiate IP-based communication with other hosts.
DHCP provides three modes for allocating IP addresses. The best-known mode is dynamic, in which the client is provided a "lease" on an IP address for a period of time. Depending on the stability of the network, this could range from hours to months . At any time before the lease expires, the DHCP client can request renewal of the lease on the current IP address. A properly-functioning client will use the renewal mechanism to maintain the same IP address throughout its connection to a single network, otherwise it may risk losing its lease while still connected, thus disrupting network connectivity while it renegotiates with the server for its original or a new IP address.
The two other modes for allocation of IP addresses are automatic (also known as DHCP Reservation), in which the address is permanently assigned to a client, and manual, in which the address is selected by the client (manually by the user or any other means) and the DHCP protocol messages are used to inform the server that the address has been allocated.
The Dynamic Host Configuration Protocol (DHCP) automates the assignment of IP addresses, subnet masks, default gateway, and other IP parameters.
When a DHCP-configured client connects to a network, the DHCP client sends a broadcast query requesting necessary information from a DHCP server. The DHCP server manages a pool of IP addresses and information about client configuration parameters such as the default gateway, the domain name, the DNS servers, other servers such as time servers, and so forth. Upon receipt of a valid request the server will assign the computer an IP address, a lease (the length of time for which the allocation is valid), and other IP configuration parameters, such as the subnet mask and the default gateway. The query is typically initiated immediately after booting and must be completed before the client can initiate IP-based communication with other hosts.
DHCP provides three modes for allocating IP addresses. The best-known mode is dynamic, in which the client is provided a "lease" on an IP address for a period of time. Depending on the stability of the network, this could range from hours to months . At any time before the lease expires, the DHCP client can request renewal of the lease on the current IP address. A properly-functioning client will use the renewal mechanism to maintain the same IP address throughout its connection to a single network, otherwise it may risk losing its lease while still connected, thus disrupting network connectivity while it renegotiates with the server for its original or a new IP address.
The two other modes for allocation of IP addresses are automatic (also known as DHCP Reservation), in which the address is permanently assigned to a client, and manual, in which the address is selected by the client (manually by the user or any other means) and the DHCP protocol messages are used to inform the server that the address has been allocated.